Case Studies

Proven Material Offset Economics

Eight validated solar glazing project profiles across Canadian cities — climate-adjusted photovoltaic generation and net premium outcomes at framework supply pricing. Each profile models a real building type: solar curtain wall, photovoltaic spandrel, solar skylight, and railing glazing applications for commercial and institutional facades.

Reading the Numbers

Net premium vs. Day 1 surplus — same product, different baseline

Case studies and the homepage calculator use the same subsidy formulas (30% federal ITC + CCA Class 43.2 on net UCC). Outcomes differ because each scenario uses a different traditional material cost per m² — the inert envelope you are displacing.

Solutions — Industrial case study

COM-M1 at Framework supply pricing vs. precast metal siding at $220.00/m²

Net capital premium: $112.23/m²

Subsidies offset ~73% of the gross premium — payback and OpEx lead the case; metal siding is a low-cost baseline, not a Day 1 surplus anchor.

Homepage calculator — default inputs

COM-M1 at Framework supply pricing vs. precast metal siding at $220.00/m² — same baseline as the industrial case study

Net capital premium: $112.23/m²

Calculator defaults to COM-M1 and metal siding ($220/m²). Raise the traditional cost slider toward stone ($600.00/m²) to see surplus outcomes — e.g. $267.77/m² at a premium facade baseline.

Adjust traditional material cost in the homepage calculator to match your displaced envelope. Every case study shows computed ITC, CCA, and net premium at framework supply pricing from factory pricing — not hardcoded market estimates.

Industrial & Manufacturing

Metal Siding to Active Power Facade

Advanced Industrial Logistics — Edmonton, Alberta

Location & segment

Edmonton, AB · Industrial

NRCan city yield 0.95× vs Saskatoon · blended 58 kWh/m²/yr — NRCan Edmonton band 55–60 kWh/m²/yr — COM-M1 opaque CdTe spandrel at rated Pmax.

Traditional Material

$220.00/m²

Estimated Generation

BIPV envelope area

5,000 m²

Product specification

COM-M1 (5,000 m²)

Est. annual generation

~290 MWh/yr

City-adjusted blended 58 kWh/m²/yr

Est. annual energy value

$43,500/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$112.23/m²

Illustrative payback

~12.9 yr

Blended BIPV: $632.81/m²

Gross premium: $412.81/m² · ITC $190/m² · CCA $111/m²

Edmonton — At 5,000 m², city-adjusted output reaches ~290 MWh/yr (~$43,500/yr at $0.15/kWh) — At ~12.9 years (illustrative, south-facing facade at 58 kWh/m²/yr and $0.15/kWh), energy savings recover the $112.23/m² net capital premium — permanent OpEx reduction from on-site generation continues after break-even. Federal ITC and CCA absorb roughly 73% of the $412.81/m² gross premium at $632.81/m² BIPV vs. $220.00/m² precast metal siding envelope — this is not a Day 1 construction surplus; metal cladding is a low-cost baseline and a modest net premium remains after subsidies. COM-M1 is the entry point for opaque spandrel replacement at scale. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Mission-critical resiliency for data infrastructure and logistics. On-site generation reduces grid exposure from day one.

Edmonton — Alberta TIER & LEED Canada

Industrial and large commercial facilities in Edmonton may be subject to Alberta's TIER regulation. On-site BIPV generation displaces Alberta grid electricity (~0.53 kg CO₂e/kWh), reducing Scope 2 emissions and potentially lowering TIER emission performance credit obligations. For institutional and commercial projects pursuing LEED Canada, BIPV facades contribute to EA Credit: Renewable Energy Production and EA Credit: Optimize Energy Performance when modelled in the whole-building energy study. Powerglass supplies material only; TIER compliance and LEED submissions require qualified Alberta-registered GHG auditors and LEED APs.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Industrial Manufacturing

Roof + Curtain Wall Combined BIPV

Large Manufacturing Plant — Saskatoon, Saskatchewan

Location & segment

Saskatoon, SK · Manufacturing

NRCan city yield 1× vs Saskatoon · blended 61 kWh/m²/yr — NRCan Saskatoon reference band 58–63 kWh/m²/yr — COM-M1 on south-facing roof and spandrel.

Traditional Material

$220.00/m²

Roof + Facade

Combined envelope

Reference Scale

~580 kW cement plant

Estimated Generation

BIPV envelope area

12,000 m²

Product specification

COM-M1 roof BIPV (7,500 m²) · COM-M1 curtain spandrel (4,500 m²)

Est. annual generation

~732 MWh/yr

City-adjusted blended 61 kWh/m²/yr

Est. annual energy value

$109,800/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$112.23/m²

Illustrative payback

~12.3 yr

Blended BIPV: $632.81/m²

Gross premium: $412.81/m² · ITC $190/m² · CCA $111/m²

Saskatoon — Roof BIPV and curtain wall spandrel in one coordinated envelope — At 12,000 m², city-adjusted output reaches ~732 MWh/yr (~$109,800/yr at $0.15/kWh) — At ~12.3 years (illustrative, south-facing facade at 61 kWh/m²/yr and $0.15/kWh), energy savings recover the $112.23/m² net capital premium — permanent OpEx reduction from on-site generation continues after break-even. Federal ITC and CCA absorb roughly 73% of the $412.81/m² gross premium at $632.81/m² BIPV vs. $220.00/m² precast metal cladding envelope — this is not a Day 1 construction surplus; metal cladding is a low-cost baseline and a modest net premium remains after subsidies. COM-M1 is the entry point for opaque spandrel replacement at scale. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Single-project envelope strategy: opaque spandrel on curtain wall plus roof BIPV replaces metal cladding and conventional roofing in one coordinated specification.

Saskatoon — NECB Performance Path & LEED Canada

Saskatchewan industrial and commercial projects follow the National Energy Code for Buildings (NECB) performance path, under which on-site BIPV generation can partially offset building energy consumption in the whole-building energy model. LEED Canada projects in Saskatoon may earn EA Credit: Renewable Energy Production points when facade BIPV is included in the energy simulation. Powerglass supplies material only; NECB and LEED compliance must be confirmed by the project engineer and LEED Accredited Professional.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Class A Commercial Office

M1 Podium Surplus Cross-Subsidizes Vision Zones

Premium Office Skyscraper — Toronto, Ontario

Location & segment

Toronto, ON · Commercial office

NRCan city yield 0.87× vs Saskatoon · blended 39.6 kWh/m²/yr — NRCan Toronto band 50–55 kWh/m²/yr — COM-M1 podium spandrel plus COM-CA2 and COM-Z3 vision zones.

Traditional Material

$600.00/m²

Podium

COM-M1 surplus

Vision zones

COM-CA2 + COM-Z3

Estimated Generation

BIPV envelope area

3,800 m²

Product specification

COM-M1 podium spandrel (800 m²) · COM-CA2 spandrel (2,400 m²) · COM-Z3 vision zones (600 m²)

Est. annual generation

~150 MWh/yr

City-adjusted blended 39.6 kWh/m²/yr

Est. annual energy value

$22,548/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$95.47/m²

Illustrative payback

~16.1 yr

Blended BIPV: $1,314.67/m²

Gross premium: $719.93/m² · ITC $394/m² · CCA $230/m²

Toronto — At 3,800 m², city-adjusted output reaches ~150 MWh/yr (~$22,548/yr at $0.15/kWh) — COM-M1 spandrel zone at lower stone baseline creates a Day 1 surplus that cross-subsidizes premium vision zones — Blended payback ~16.1 years (illustrative, south-facing facade at 39.6 kWh/m²/yr and $0.15/kWh) — blended BIPV at $1,314.67/m²/m² vs $600.00/m² stone principal baseline. Federal ITC and CCA Class 43.2 reduce the remaining net capital premium — permanent OpEx reduction from on-site generation continues after break-even. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Framework supply pricing card includes illustrative $250.00/m² install/labor adder for installed-vs-installed comparison with imported natural building stone.

COM-M1 podium spandrel at $575/m² stone precast baseline generates a Day 1 surplus that cross-subsidizes the CA2/Z3 vision zones — blended envelope premium recovers through on-site generation.

Toronto Green Standard (TGS)

Toronto's Green Standard Tier 2 and above reward on-site renewable energy generation and high-performance building envelopes. BIPV facades contributing to Tier 2 operational carbon targets must be modelled in the project energy study by a qualified energy consultant. LEED Canada (CaGBC) projects in Toronto may also earn points under EA Credit: Renewable Energy Production when on-site generation is included in the whole-building energy model. Powerglass supplies material only; we do not perform TGS compliance submissions or energy modelling.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Class A Corporate HQ

Designer Curtain Wall with M1 Cross-Subsidy

Corporate Headquarters Campus — Calgary, Alberta

Location & segment

Calgary, AB · Corporate HQ

NRCan city yield 1.03× vs Saskatoon · blended 43.4 kWh/m²/yr — NRCan Calgary band 60–65 kWh/m²/yr — COM-M1 service spandrel, COM-CA2 main facade, COM-CBS1 accent panels.

Traditional Material

$600.00/m²

Service/mech

COM-M1 surplus

Total area

~5,100 m²

Estimated Generation

BIPV envelope area

5,100 m²

Product specification

COM-M1 service/mech spandrel (600 m²) · COM-CA2 main facade (3,600 m²) · COM-CBS1 accent panels (900 m²)

Est. annual generation

~221 MWh/yr

City-adjusted blended 43.4 kWh/m²/yr

Est. annual energy value

$33,170/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$101.59/m²

Illustrative payback

~15.6 yr

Blended BIPV: $1,327.39/m²

Gross premium: $732.10/m² · ITC $398/m² · CCA $232/m²

Calgary — At 5,100 m², city-adjusted output reaches ~221 MWh/yr (~$33,170/yr at $0.15/kWh) — COM-M1 spandrel zone at lower stone baseline creates a Day 1 surplus that cross-subsidizes premium vision zones — Blended payback ~15.6 years (illustrative, south-facing facade at 43.4 kWh/m²/yr and $0.15/kWh) — blended BIPV at $1,327.39/m²/m² vs $600.00/m² stone principal baseline. Federal ITC and CCA Class 43.2 reduce the remaining net capital premium — permanent OpEx reduction from on-site generation continues after break-even. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Framework supply pricing card includes illustrative $250.00/m² install/labor adder for installed-vs-installed comparison with imported designer stone facade.

COM-M1 service/mech spandrel at $560/m² stone creates a surplus that offsets premium CA2/CBS1 curtain wall zones — blended payback improved by ~1 year versus CA2-only envelope.

Model this project

Mixed-Use Residential Tower

Tower Spandrel + Railing + Amenity BIPV

High-Rise Multi-Dwelling — Winnipeg, Manitoba

Location & segment

Winnipeg, MB · Mixed-use MDU

NRCan city yield 0.95× vs Saskatoon · blended 53.7 kWh/m²/yr — NRCan Winnipeg band 55–60 kWh/m²/yr — COM-M1 tower spandrel, COM-S1 balcony railings, COM-CA2 amenity glazing.

Traditional Material

$380.00/m²

Products

COM-M1 + COM-S1 + COM-CA2

CMHC MLI Select

Up to 95% LTV

Estimated Generation

BIPV envelope area

2,600 m²

Product specification

COM-M1 tower spandrel (1,600 m²) · COM-S1 balcony railings (600 m²) · COM-CA2 amenity glazing (400 m²)

Est. annual generation

~140 MWh/yr

City-adjusted blended 53.7 kWh/m²/yr

Est. annual energy value

$20,934/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$134.34/m²

Illustrative payback

~16.7 yr

Blended BIPV: $1,085.19/m²

Gross premium: $649.81/m² · ITC $326/m² · CCA $190/m²

Winnipeg — COM-M1 tower spandrel vs precast $420/m² creates a Day 1 surplus that partially offsets COM-S1 railing and CA2 amenity premiums — At 2,600 m², city-adjusted output reaches ~140 MWh/yr (~$20,934/yr at $0.15/kWh) — Blended payback ~16.7 years (illustrative, south-facing facade at 53.7 kWh/m²/yr and $0.15/kWh) — blended BIPV at $1,085.19/m²/m² across spandrel, railings, and amenity zones. CMHC MLI Select green financing (up to 95% LTV and 50-year amortization) further strengthens the capital stack — structural resolution of the landlord split-incentive enables developer capital cost to flow to building balance sheet savings. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

COM-M1 tower spandrel vs precast $420/m² baseline delivers a Day 1 surplus that offsets S1 railing premium — blended payback displayable without CMHC financing. CMHC MLI Select (up to 95% LTV) further strengthens the capital stack.

Model this project

Institutional Envelope

Federal Institutional Spandrel — COM-M1 BIPV Envelope

Federal Campus & Civic Building — Ottawa, Ontario

Location & segment

Ottawa, ON · Institutional

NRCan city yield 0.87× vs Saskatoon · blended 52.9 kWh/m²/yr — NRCan Ottawa band 50–55 kWh/m²/yr — COM-M1 opaque CdTe spandrel on civic institutional envelope.

Traditional Material

$550.00/m²

Envelope

COM-M1 spandrel

Asset class

Institutional

Estimated Generation

BIPV envelope area

1,800 m²

Product specification

COM-M1 institutional spandrel (1,800 m²)

Est. annual generation

~95 MWh/yr

City-adjusted blended 52.9 kWh/m²/yr

Est. annual energy value

$14,283/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Day 1 Construction Budget Surplus

+$217.77/m²

Blended BIPV: $632.81/m²

Gross premium: $82.81/m² · ITC $190/m² · CCA $111/m²

Ottawa — federal institutional spandrel — At 1,800 m², city-adjusted output reaches ~95 MWh/yr (~$14,283/yr at $0.15/kWh) — COM-M1 opaque spandrel replaces precast/stone institutional envelope at $632.81/m². Federal ITC and CCA Class 43.2 exceed the $82.81/m² gross premium — Day 1 construction budget surplus against $550.00/m² precast/stone institutional envelope — lifecycle generation offsets operating budgets over the asset's long civic life. ITC and CCA are the compliance and financing mechanism — this is an operating-budget and lifecycle story for federal and civic institutional procurement. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Compliance & Fiscal Framework

Federal fiscal tools deliver Day 1 surplus against stone baseline

Federal ITCCCA Class 43.2LEED CanadaNECB Performance Path

At COM-M1 TSV_1 pricing ($632.81/m²) vs. $550/m² precast/stone institutional, the 30% federal ITC and CCA Class 43.2 deductions exceed the gross envelope premium — producing a Day 1 construction budget surplus (~−$218/m²). Federal and institutional facilities capture full lifecycle value through on-site generation, operating budget savings, and clean-technology certifications aligned with federal procurement mandates.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

30-Year Lifecycle Value

Asset life

30 years

Civic / institutional

Cumulative energy value

$428K

2,857 MWh generated

Net premium offset

Full offset + surplus

Energy savings vs. net capital cost

Illustrative — south-facing vertical facade reference yield over 30 years. Net premium after 30% federal ITC and CCA Class 43.2. Validate site-specific output with a qualified energy consultant.

COM-M1 opaque spandrel replaces precast/stone cladding with active power generation — federal ITC and CCA Class 43.2 exceed the gross premium against stone, delivering a Day 1 construction budget surplus. Long civic asset life amplifies lifecycle generation value.

Ottawa — LEED Canada & NECB Performance Path

Federal and institutional projects in Ottawa frequently pursue LEED Canada certification through the Canada Green Building Council (CaGBC). LEED v4.1 EA Credit: Renewable Energy Production can include on-site BIPV generation when modelled by the project LEED AP. Under the National Energy Code for Buildings (NECB) performance path — adopted by Ontario — modelled kWh from facade-integrated photovoltaics can partially offset building energy consumption toward code targets. Powerglass supplies material only; NECB and LEED compliance analysis must be performed by the project engineer or LEED Accredited Professional.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Coastal Designer Facade

Coastal designer facade — coloured BIPV glass

Waterfront Class A Tower — Vancouver, British Columbia

Location & segment

Vancouver, BC · Coastal designer

NRCan city yield 0.79× vs Saskatoon · blended 33.3 kWh/m²/yr — NRCan Vancouver band 45–50 kWh/m²/yr — CdTe performs relatively well in diffuse coastal light; COM-CBS1 coloured panels plus COM-CA2 spandrel.

Traditional Material

$600.00/m²

Facade Type

Coloured vision glass

Climate

Coastal / marine

Estimated Generation

BIPV envelope area

5,000 m²

Product specification

COM-M1 opaque spandrel (800 m²) · COM-CBS1 coloured panels (1,200 m²) · COM-CA2 spandrel (3,000 m²)

Est. annual generation

~167 MWh/yr

City-adjusted blended 33.3 kWh/m²/yr

Est. annual energy value

$24,981/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$83.63/m²

Blended BIPV: $1,302.15/m²

Gross premium: $702.15/m² · ITC $391/m² · CCA $228/m²

Vancouver coastal designer coloured glass — At 5,000 m², city-adjusted output reaches ~167 MWh/yr (~$24,981/yr at $0.15/kWh) — Installed comparison uses $1,302.15/m² all-in BIPV (material plus illustrative $250.00/m² install/labor) vs. $600.00/m² installed designer glazing — At ~16.7 years (illustrative, south-facing facade at 33.3 kWh/m²/yr and $0.15/kWh), energy savings recover the $83.63/m² net capital premium — architect-led coloured BIPV preserves street presence at $1,302.15/m² vs. $600.00/m² imported designer curtain wall glazing. Lower city solar factor is offset by designer facade value and permanent OpEx reduction. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Designer Value Frame

Architect-specification coloured glass — matches premium curtain wall glazing aesthetic with active power generation embedded in the envelope.

Baseline (Imported designer curtain wall glazing)

$600.00/m²

BIPV (installed, all-in)

$1,510.00/m²

+$910.00/m² vs. baseline before subsidies

Regulatory driver

Energize Vancouver GHG bylaw — annual GHG intensity reporting and limits from 2026 for large commercial buildings; BIPV displaces grid electricity imports and directly lowers reported GHGi.

Energize Vancouver program details →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Framework supply pricing card includes illustrative $250.00/m² install/labor adder for installed-vs-installed comparison with imported designer curtain wall glazing.

Architect-led coloured glass specification preserves coastal street presence while federal subsidies offset the installed envelope premium.

Vancouver green building programs

Vancouver's Energize Vancouver program requires annual energy and GHG reporting for large commercial and multi-family buildings, with GHG intensity limits for large office and retail properties. On-site generation from BIPV glazing reduces grid electricity imports and can lower reported GHGi — your energy consultant can model the contribution for your specific building. For new construction, the BC Energy Step Code tiers reward on-site renewable generation toward near-zero outcomes. Powerglass supplies material only; we do not perform compliance reporting or energy modelling.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Quebec Architecture

M1 Podium Surplus Enables QC Feature Facade

Heritage-Inspired Commercial Tower — Montreal, Quebec

Location & segment

Montreal, QC · QC architecture

NRCan city yield 0.87× vs Saskatoon · blended 37.8 kWh/m²/yr — NRCan Montreal band 50–55 kWh/m²/yr — COM-M1 podium spandrel plus COM-CBS1 bronze panels and COM-CA2 spandrel.

Traditional Material

$600.00/m²

Podium

COM-M1 surplus

Feature facade

COM-CBS1 + COM-CA2

Estimated Generation

BIPV envelope area

5,400 m²

Product specification

COM-M1 podium spandrel (1,200 m²) · COM-CBS1 bronze panels (1,400 m²) · COM-CA2 spandrel (2,800 m²)

Est. annual generation

~204 MWh/yr

City-adjusted blended 37.8 kWh/m²/yr

Est. annual energy value

$30,648/yr

At $0.15/kWh

Reference yields use NRCan vertical south data with CdTe installed capacity (~155 Wp/m² for opaque spandrel). Validate site-specific output with NRCan's PV mapping tool. NRCan PV mapping tool.

Framework supply pricing

Net Capital Premium

$68.68/m²

Illustrative payback

~12.1 yr

Blended BIPV: $1,256.74/m²

Gross premium: $665.63/m² · ITC $377/m² · CCA $220/m²

Montreal Quebec heritage-inspired coloured glass — At 5,400 m², city-adjusted output reaches ~204 MWh/yr (~$30,648/yr at $0.15/kWh) — COM-M1 podium spandrel at $560/m² stone creates a Day 1 surplus that cross-subsidizes the coloured glass premium. Blended payback ~12.1 years (illustrative, south-facing facade at 37.8 kWh/m²/yr and $0.15/kWh) — architect-led coloured BIPV at blended $1,256.74/m²/m² vs. $600.00/m² imported natural stone and bronze-tinted glazing. Federal ITC and CCA Class 43.2 plus M1 cross-subsidy enable the Quebec heritage character specification while delivering on-site generation. Illustrative south-facing vertical facade reference yield — not a full irradiance model. Adjust for site orientation, shading, and climate zone..

Compliance & Fiscal Framework

M1 cross-subsidy + federal ITC/CCA brings blended payback under 15 years

Federal ITCCCA Class 43.2LEED CanadaRPCGQ / SPEDE

COM-M1 podium spandrel at $560/m² stone precast delivers a Day 1 construction budget surplus (−$228/m²) that directly offsets the CBS1/CA2 premium. Federal ITC and CCA Class 43.2 absorb a significant portion of the remaining gross premium. Blended envelope payback is approximately 12 years against the stone/bronze baseline. Quebec's RPCGQ carbon pricing and SPEDE cap-and-trade apply to large emitters; on-site BIPV generation reduces grid electricity imports and contributes to LEED Canada EA Credit: Renewable Energy Production.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Framework supply pricing card includes illustrative $250.00/m² install/labor adder for installed-vs-installed comparison with imported natural stone and bronze-tinted glazing.

COM-M1 podium spandrel at $560/m² stone creates a Day 1 surplus that offsets the coloured CBS1/CA2 premium — federal ITC + CCA plus M1 cross-subsidy brings blended payback under 15 years.

Québec — RPCGQ, SPEDE & LEED Canada

Quebec's Règlement sur la déclaration obligatoire de certaines émissions de contaminants dans l'atmosphère (RPCGQ) requires mandatory GHG reporting for large commercial and industrial emitters. Quebec's cap-and-trade system (SPEDE/Western Climate Initiative) creates carbon pricing obligations for covered facilities. On-site BIPV generation reduces grid electricity imports — and while Quebec's hydro-dominant grid has a low emission factor, displacing grid electricity lowers reported operational GHG intensity. LEED Canada projects in Montreal may earn points under EA Credit: Renewable Energy Production when BIPV generation is included in the whole-building energy model. Federal ITC and CCA Class 43.2 apply equally in Quebec. Montreal heritage and arrondissement design requirements must be confirmed for any project-specific facade specification. Powerglass supplies material only; we do not perform RPCGQ reporting, SPEDE compliance, or LEED submissions.

Green building programs →

Material supply only — not compliance or certification advice. Confirm BIPV contribution with your energy consultant.

Model this project

Ready to specify COM series for your project?

Review full specifications, transparency options, and pricing for all five BIPV glazing systems.

View Products →Green Building Programs →